Computer Numerical Control

Showing posts with label Caterpillar. Show all posts

People You Will Need When You Already Have A CNC Machine

If you think that you will just sit back and relax when you have a CNC machine in your shop, think again. CNC may help you speed up your operations and even make them more efficient. However, CNC is not a “wonder robot” which will make you disregard all your employees and expect your shop to run on auto-pilot.

Though you will need more people without the CNC technology, you will need only three very, very skilled people. Call these people your friends, your team, whatever. In the long run, they might be just all you need to keep the shop in good shape.

THE PROGRAMMER

The first person is the CNC programmer. S/he is like the "playmaker". S/he will create the programs that the CNC machines are intended to execute. Since the programs are in the form of CNC codes fabricated like sentences, he should have mastered these codes because they work like a different language. The regular CNC machine can use up to 50 codes, so that’s like learning 50 new words for the newbie.

Also, the programmer should have at least and engineering or machining degree. Remember that the CNC machine will only execute WHAT IT IS PROGRAMMED TO DO. If the program is wrong, the whole operation goes down the drain with it. Moreover,s/he should also be flexible and have a fast turn-around because a CNC machine is often used to machine a huge selection of different work-pieces.

THE OPERATOR

The second person that you need is the CNC operator. S/he will simply recheck the programs loaded to the machine and push the right buttons to get the work done. However, thinking that a CNC operator can have little or NO SKILL AT ALL is wrong. A CNC machine operator must have at least basic machining skills and s/he should have undergone some form of training to run a CNC machine.

These machines can produce very intricate motions, making it possible to make shapes that cannot be created on conventional machine tools. So, the operator should foresee this complexity and know how to cruise with it. The skills that an operator must have though, are lesser compared to the operators of conventional machine tools.

THE TECHNICIAN

The third person that will need is the CNC technician. Although this may still be the programmer, it’s more convenient to always have a technical expert on-call because in the long run, you may have more than one CNC machine and you may need to prioritize over the other in case both gets crippled at the same time. Just like the programmer, the technician should also be flexible and articulate. CNC offers a lot of complexity when it’s running right, how much more if it’s behaving badly?

So, if you are having job openings for positions that need to be handling a CNC machine, ask the applicants first to do a demo for you and make sure that during the demo, they know what they’re doing. An exam may also do wonders too. If they have no experience with any kind of CNC machine, it is advisable that you encourage them to take short courses on CNC.

Eighty-hour courses are available online and hey, it’s better than nothing. Experts even encourage employers to hire CNC machinists who have finished AND PASSED the National Occupational Competency Testing Institute (NOCTI) assessment just so they could be sure that their CNC machines will go to good hands. After all, a CNC machine is still an asset.

What It Takes to be a CNC Operator

Sphere: Related Content

Being a CNC operator may seem a little too easy but take a look at the requirements from companies and you'll think twice about the difficulty level of being a CNC operator.

Being a CNC operator takes a lot more than just being able to handle long hours of staring at the monitor or creating an input stack for the programs. What it means is that you have to have outstanding programming capabilities and at least basic machining knowledge.

Job Requirements

A CNC operator has to be knowledgeable about blueprint reading. This is because, basic design concepts and construction is hinged heavily on blueprints. Furthermore, the components that are being manufactured by companies that have CNC machines are based on blueprints of a whole structure. Therefore, if you do not know how to read blueprints, you won't know what to program the machine to do.

Another thing that a CNC operator has to have is familiarization with machine operations. If the operator does not know which machine tools are for which job, or how fast the machine can work, or what the rate of feed is for the machine, or even the depth of the cut needed for the operation, then you wouldn't be productive and the operation would be a failure.

The most obvious thing that an operator would have to know would be the general operating characteristics of the machine. He/she would have to know what the machine runs on—tape, network data input, or floppy. Furthermore, proper data input procedures have to be observed to lower the error ratio. A faulty data input procedure could cause the entire cycle to collapse therefore lowering the level of efficiency.

Working with CNC machines means that you will also be dealing with a lot of computer work. This means that you have to be familiar with basic computer operations. In addition to that, you will have to know how to interpret data in the program output stack.

The company's requirements and the benefits.

some companies require a lot more than what is written above. Oftentimes, they require applicants to be familiar with the system that they use. Other times, they want the applicants to have no less than five years of experience working in a factory or at least working with a CNC machine. Also, some companies require applicants to undertake a specific training program to ensure the employers that the material they are getting is worth the money they will be shelling out.

However, the benefits that can be reaped is quite solid. Salaries and insurances are often negotiable. Working hours are also a snap! All you would have to do is initiate the cycle and then sit back and occasionally check for glitches. Furthermore, these companies often takes care of their operators as there is always a shortage of skilled enough people to take hold of the position.

So, what does it take to be a CNC operator? To synthesize the requirements, you have to be amazingly determined to pass the requirements of the company you are applying for. And then, you have to be able to quickly restructure the program in case of any glitch that the computer might encounter during the process.

The benefits are solid, but passing the requirements is like surviving the gauntlet. Think about this career.