Computer Numerical Control

Showing posts with label Computer Numerical Control Machine. Show all posts

In Depth Discussion In Planning CNC Programs

Understanding the Computer Numerical Control Machine as well as learning the method of programming these machines is not enough to maximize the capability of these devices. Even if you are proficient on those two stated above, proper understanding of the step by step procedures is still important.

In this article we would talk about the step by step procedures of programming Computer Numerical Control Machines which is recommended by the most experienced CNC Machine Operators and progammers.

Step by Step procedures in planning of a CNC program

Whenever we try to program a Computer Numerical Control Machine the first thing that the Machine operator should consider is the blueprint of the part we are trying to manufacture. Proper understanding and reading of a blueprint is a basic and the most important skill in the manufacturing Industry that engineers, managers, CNC machine operators as well as CNC programmers should know about.

Proper understanding of these blueprints should help the CNC machine operator as well as the programmer to use the appropriate CNC machine to be used.

The second step on the proper programming of a Computer Numerical Control Machine is by selecting the appropriate type of Machine that will be used. This is where the proper understanding of each machine type comes into play. Knowing the type of design, specifications as well as features of a machine will help you on choosing the appropriate one.

The third step would be the analysis of the operations or the setup sheet. The setup sheet is used to describe the necessary processes needed to create the parts on a CNC machine. The setup sheet includes the proper machine sequence and also the tools and cutting data to be used. Specifications written on the setup sheet aids the programmer on the proper algorithm needed by the Computer Numerical Control Machine.

The fourth step on the step by step requirements would be the proper selection of the tools required to create the parts. This step is important on the industry manufacturing practices, basically the tools to be chosen is based on the common sense and Good CNC operators and programmers should be aware of them. Usually there is a certain checklist on this step, the most important point of this checklist would be knowing the material to be machined as well as its characteristics.

Fifth step would be the calculation of the cutting data. Proper calculation is one of the important steps in the planning process. This is where the spindle speed, federate value, cutting speed and the depth of cut is calculated to fit to the specifications in the blueprint.

Sixth step would be the actual programming process, this is also the step where the proper Units are inserted into the programming algorithm of the Computer Numerical Control Machine. This is where we incorporate all the codes that are needed to run the whole CNC machines in the CAD software.

Programming Considerations

In order for other programmers to analyze and append your algorithm, it is important to have certain programming considerations. These program considerations were suggested by experienced Computer Numerical Control Machine Programmers and Operators.

First it is important that you develop a programming technique that will be readily understood by other developers, with a good programming technique programs could easily be appended if there are any errors.

Second, it is also important to proofread all programs for typographical errors before being executed in the CAM software, this is to ensure that the CNC machine would operate its desired operation. And most important of all is to keep your programs as simple as possible in order for the machine to process the instructions faster.

CNC Machine Setup and Operation

Sphere: Related Content

Computer Numerical Control Machines are sophisticated instruments that only trained CNC operators should operate them. There are certain rules and guidelines to consider if you are planning to use a CNC machine by yourself.

CNC checklist before startup

Before starting up the Computer Numerical Control Machine, there are safety rules that must be considered first. First important aspect before starting up the CNC machine is to ensure your own safety, therefore wearing protective gear, such as eye glasses and short sleeved shirts is an important dress code during CNC operation. You should also be careful whenever you are handling tools and sharp edged work pieces to avoid any accidents. You must also ensure that the cutting tools are fastened in the machine spindle to avoid any movement during the cutting operation.

Actual Startup, Operation and Machine Setup of the CNC

The Computer Numerical Machine startup procedure varies depending with the type of machine being used but usually there is a main power switch or a circuit breaker to turn it on. Some machines also require hydraulics or air pressure before it starts up.

When the Computer Numerical Machine starts up, the machine usually starts at its Machine Home Position. The Machine Home Position allows the control and the machine to have a preset starting position for all its axes. After startup, the CNC machine must be sent to this position before the work begins. This position will later be changed to an appropriate location whenever you are machining a particular part of a product.

The Tool Length Offset Value or TLO is the distance from the tip of the tool from the spindle in the Home Position. The TLO must be set for each tool in the current job. The TLO can be set using a height gage, fixture location, as well as the reference tool. When these values are determined, they are stored in the Controller to be used during the program operation.

After setting the Tool Length Offset Value it is time to setup a part origin of a CNC machine. Setting up the part origin on a CNC machine is the same as setting up a conventional machine. It usually involves positioning the axes to a point where the plan designates as its origin. There are many ways to locate the position on the reference point, it is by using edge finders, wigglers or magnifying glasses.

After setting up the whole system for the Computer Numerical Control, it is time to Load the program to the machine. Program loading is different for each machine. Some machines have tape readers to input the program into the Computer Numerical Control Machine’s memory. Newer machines have internal or external floppy devices to input the program to the machine. After the program is loaded to the machine, the CNC machine is now ready to use.

There are certain instances when you have to change the tools in the Computer Numerical Control manually during machine operations. When a certain machining operation is complete, the program will move the aces to the tool change position and display the next tool needed. It is now the job of the Machine operator to remove and replace it with the next tool.

Extra Care must be taken whenever you are starting operations with the CNC machine, any mistake taken during the part of the operation may lead to serious injuries from the machine operator.